![]() The VGA interface is not engineered to be hotpluggable (so that the user can connect or disconnect the output device while the host is running), although in practice this can be done and usually does not cause damage to the hardware or other problems. Four pins carried Monitor ID bits which were rarely used VESA DDC redefined some of these pins and replaced the key pin with +5 V DC power supply. In the original version of DE-15 pinout, one pin was keyed by plugging the female connector hole this prevented non-VGA 15 pin cables from being plugged into a VGA socket. VGA connectors and cables carry analog component RGBHV (red, green, blue, horizontal sync, vertical sync) video signals, and VESA Display Data Channel (VESA DDC) data. On laptop computers or other small devices, a mini-VGA port is sometimes used in place of the full-sized VGA connector.ĭE-15 is also conventionally called RGB connector, D-sub 15, mini sub D15, mini D15, DB-15, HDB-15, HD-15 or HD15 (High Density, to distinguish it from the older and less flexible DE-9 connector used on some older VGA cards, which has the same shell size but only two rows of pins). The 15-pin VGA connector is found on many video cards, computer monitors, and high definition television sets. "A Video Graphics Array (VGA) connector is a three-row 15-pin DE-15 connector. This pinout diagram example showing a VGA connector (as viewed from the socket) was redesigned from the Wikimedia Commons file: DE15 Connector Pinout.svg. The example "DVI pinout diagram" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Audio and Video Connectors solution from the Engineering area of ConceptDraw Solution Park. Therefore, pinouts are a vital reference when building and testing connectors, cables, and adapters." If contacts of disparate functions are allowed to make contact, the connection may fail and damage may result. When connected, each contact of a connector must mate with the contact on the other connector that has the same function. The functions of contacts in electrical connectors, be they power- or signaling-related, must be specified in order for connectors to be interchangeable. "In electronics, a pinout (sometimes written "pin-out") is a cross-reference between the contacts, or pins, of an electrical connector or electronic component, and their functions. This AV connector pinout diagram example was redesigned from the file: DVI pinout.svg.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |